+(800) 818-4167 contact@ecosmartcontractor.com
Menu

Tag: los angeles attic insulation

Home Insulation – Is It Cold Outside?

September 12, 2017
| No Comments
| Categories: Insulation

Insulation at your home aids in saving energy and reducing utility bills. It makes sure that house more comfortable. Insulation in your home serves to help in keeping the house cool in summer and warm in winter but it also prevents damage from leaking water and provides an excellent thermal resistance. Insulation is valuable to keep the temperature of the house as outdoor temperature.

By utilizing insulation, the fee spent in cooling and heating the home could be reduced to a great extent. There must always be sufficient insulation in your own home to guard the house from air leakage, water leakage etc. R value, also referred to as thermal resistance is used to compute the insulation resistance. It shall be installed amongst the heated and unheated space.

There are many types of home insulation available. All insulation has pros and cons. They are primarily differentiated according to the material applied to the insulation. They can be distinguished into Plastic foam, rigid board, reflective, loose fill, batts and blankets and blown in insulation etc. Batts and blankets insulation can be performed via the homeowner himself. No professional is required for this type of insulation. They are not hard to be affordable and the fabric like blankets and batt strips are readily available within the market. Batts and Blankets insulation can be executed with oversight by materials like Fiberglass, Mineral wool, plastic, concrete block, polystyrene fiber etc.

Fiberglass insulation might cause allergies to your skin layer or maybe even used properly. Therefore, proper care must be studied while installing this type of insulation. Mineral wool insulation uses natural minerals for insulation. It helps in solving the problem by fire protection and sound reduction but it surely may end in respiratory problems. Plastic fiber glass insulation is performed with recycled plastic bottles. Loose fill insulations are blown in varieties of insulation that are primarily made out of glass, fibers, vermiculite or perlite. They are primarily utilized in attics and walls. Cellulosic insulation is made out of wood fibers and recycled newspapers. It is insect repellent promoting great protection from fire because of the chemicals added into it. It does not provide good capacity moisture.

Reflective insulations are produced from aluminium foil and plastic films, cardboard etc. It is very helpful in filtering the heat out off of the residence in summer. But they are an excellent conductor of electricity so no electric equipment or fixture must be installed close to the insulation. Foam Board insulations use polystyrene material and reduce air, heat and water leaks. They provide good capacity moisture and can be used on ceilings, floors and walls. They provide strength to the house and provide thermal resistance.

Insulation can be executed at home in attics, on ceilings, exterior walls and garages and storage areas for correct ventilation and thermal resistance. Insulation must be performed either by professionals or proper care must be taken while installing them. Air and water leaks should be thoroughly checked before installing the insulation as moisture can dampen the efficiency of insulation or insulation may mask them. It must be checked that electrical equipment and fixtures are failing to find touched by the insulation. Also several insulation can cause allergies to the skin and may cause respiratory problems so proper care must be executed while installing them. Call us TODAY to have an inspection and analysis!

 

 

Home Insulation at Different Climatic Conditions

June 19, 2017
| No Comments
| Categories: Air Duct Cleaning

Attic insulation is without doubt one of the home remodeling processes that are done to have the temperature moderate contained in the house. The insulation is done most probably in extreme cold and warm climatic conditions. The aim of insulation is similar but the kinds and style of insulation employed is entirely different. Insulation is also in dire straits secondary reasons like pest resistant, noise barrier, energy saver, alleviates utility bills, etc… The below paragraphs shows the type of insulation according to the seasons. The insulation is completed either in the recent climatic region or cold climatic region.

Insulation in hot climatic areas: In a warm climatic condition, the recent air enters and accumulates into the home through wall, attic, etc… and lets the cool air to pass out. This will happen despite using the electronic cooling equipment as well as raises the usage and shows rapid flurry of the utility bill. Insulating the house will prevent the let-from cool air. Because the radiation degree is more in hot temperatures, the insulation also serves because the radiation barrier. The types of insulation utilized in a hot climate are listed below.

Blown-in attic insulation: Because the name suggests, the insulation is implemented by blowing the insulation within the wall or roof in high pressure in the special equipment. Blown-in insulation is conducted in all types of insulation materials like fiberglass, cellulose and rock wool. There will be three main sort of blown in insulation used, they are loose fill, wall cavity spray and stabilized type. Blown-in cellulose insulation which happens to be the eco-friendly process of insulation, as the fabric is constructed from the recycled paper. They are cheaper and can certainly fill into subtle air spaces but this insulation is implemented within the walls, attic floors and relatively tiny places.

Rolled-in insulation: Unlike blown-in, here is the flat piece like insulation materials come in layers. The small layer of materials is taken and so much space is filled. This comes under the blanket category. The insulation material utilized in this type which is the simple fiberglass and rock wool. They carry damaging effect in filling subtle spaces. This kind is over priced and can possibly be worked on easily even via the less experienced workers. Rolled-in insulation doesn’t require the special type of kit for the installation. They can be implemented in walls and flat floors and ceiling that are devoid of gaps and wires.

Insulation for cold climate: In a chilly climatic condition, the reverse reaction happens (i.e.) the cold air let in and hot air let out will probably be more. Folks attempt simple stuff like with a furnace to produce heat, the utilization of hot ACs as well as other electronic devices to maintain the temperature warm but the insulation serves the aim well, because seal even the small minute small portion the house. In situations when of cold climates, it is sensible to select for solar paired with the insulation, which doubles the benefit. The insulation implementation type varies according to the architecture of the house and certain other factors. Essentially the most used Insulation type adapted in cold climate is explained below:

Loose fill insulation: Loose fill represents the flexibleness of the substances used. The loose fill cellulose insulation is usually preferred for the kind of insulation for the wintertime season. The loose fill is blown with the special equipment they can stick and aqcuire filled in the small spaces. This used most often in crawl spaces and the knee walls of the attic. They can be put on the spaces till the specified thickness is reached. This is a very inexpensive sort of insulation and required skilled labor for the installation. This type of insulation isn’t recommended for your finished buildings and attics.

These are seem to be the insulation types utilized in the attic insulation installation process at different climatic conditions. Call us today at (800) 818-4167 to acquire a free in home consultation somewhat distance from technician of Eco Smart Contractor.